ML03512R1BAT2A [KYOCERA AVX]
CAP CER 2.1PF 50V C0G/NP0 0603;型号: | ML03512R1BAT2A |
厂家: | KYOCERA AVX |
描述: | CAP CER 2.1PF 50V C0G/NP0 0603 |
文件: | 总4页 (文件大小:582K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Multilayer Organic (MLO®) Capacitors
General Information
GENERAL DESCRIPTION
Based on its patented multilayer low loss organic (MLO®) technology. These new capacitors represent a
paradigm shift from traditional ceramic and thin film passive SMD components. Multilayer Organic Capacitors
(MLOC) are polymer based capacitors that use high conductivity copper interconnects in a multilayer fashion.
The ability to fabricate these components on large area substrates and state of the art laser direct imaging
allow for improved cost benefits and tolerance control. The end result is a state of the art low ESR and high SRF
low profile RF capacitor that can support frequencies well above one GHz. Additionally MLOCs are expansion
matched to printed circuit boards to allow for improved reliability.
FEATURES
APPLICATIONS
• RF Power Amplifiers
• Low Noise Amplifiers
• Filter Networks
•
•
•
•
•
Low ESR
Hi-Q®
High Self Resonance
Tight Tolerance
Low Dielectric Absorption
(0.0015%)
• Instrumentation
HOW TO ORDER
ML
03
7
1
1R8
P
A
P
2A
AVX Style
Case Size
Voltage
Code
5 = 50V
V = 250V
Temperature
Capacitance
EIA Capacitance Code in pF.
First two digits = significant
figures or “R” for decimal place.
Third digit = number of zeros or
after “R” significant figures.
Capacitance
Failure Rate
Termination Style
Packaging Code
03 = 0603
2A = 7” Reel Unmarked
Coefficient Code
Tolerance Code
P = ± 0.02 pF
A = ± .05 pF
B = ±.10 pF
C = ±.25 pF
D = ±.5 pF
Code
Code
1 = 0±30ppm
A = Not
Applicable
T = Ni, Sin
F = ±1%
R
G = ±2%
J = ±5%
T
LEAD-FREE COMPATIBLE
COMPONENT
B
L
W
MECHANICAL DIMENSIONS: inches (millimeters)
Case
Length (L)
Width (W)
Thickness (T)
Band Width (B)
Castellation Radius (R)
0.063 ± 0.004
(1.600 ± 0.102)
0.033 ± 0.004
(0.838 ± 0.102)
0.025 ± 0.004
(0.635 ± 0.102)
0.015 ± 0.005
(0.381 ± 0.127)
0.008 ± 0.002
(0.203 ± 0.051)
0603
TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481
(equivalent to IEC 286 part 3).
—8mm carrier
—7” reel, 3,000 pcs per reel
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
340
012216
Multilayer Organic (MLO®) Capacitors
Mechanical & Environmental Specifications
ENVIRONMENTAL CHARACTERISTICS
TEST
CONDITIONS
REQUIREMENT
Life (Endurance) MIL-STD-202F
Method 108A
No visible damage ∆C/C ≤2% for C≥5pF
∆C/C ≤0.25pF for C<5pF
125°C, 2UR, 1000 hours
Accelerated Damp Heat Steady State
MIL-STD-202F Method 103B
Temperature Cycling
MIL-STD-202F Method 107E
MIL-STD-883D Method 1010.7
Resistance to Solder Heat
IEC-68-2-58
No visible damage ∆C/C ≤2% for C≥5pF
∆C/C ≤0.25pF for C<5pF
85°C, 85% RH, UR, 1000 hours
–55°C to +125°C, 15 cycles – MLO®
260°C ± 5°C for 10 secs.
No visible damage ∆C/C ≤2% for C≥5pF
∆C/C ≤0.25pF for C<5pF
C remains within initial limits
MECHANICAL SPECIFICATIONS
TEST
CONDITIONS
REQUIREMENT
Components completely immersed in a
solder bath at 235°C for 2 secs.
Terminations to be well tinned, minimum 95% coverage
Solderability IEC-68-2-58
Components completely immersed in a Dissolution of termination faces ≤15% of area
Leach Resistance IEC-68-2-58
solder bath at 260±5°C for 60 secs.
Dissolution of termination edges ≤25% of length
Adhesion MIL-STD-202F
Method 211A
A force of 5N applied for 10 secs.
No visible damage
Termination Bond Strength
IEC-68-2-21 Amend. 2
No visible damage C/C ≤2% for C≥5pF
∆C/C ≤0.25pF for C<5pF
Tested as shown in diagram
Robustness of Termination
IEC-68-2-21 Amend. 2
A force of 5N applied for 10 secs.
No visible damage
Good solderability
12 months minimum with components
stored in “as received” packaging
Storage
QUALITY & RELIABILITY
studied. Various methods and standards have been used to ensure a
high quality component including JEDEC, Mil Spec and IPC testing. AVX’s
quality assurance policy is based on well established international industry
standards. The reliability of the capacitors is determined by accelerated
testing under the following conditions:
MLO® capacitors utilize high density interconnect wiring technology on well
established low loss organic materials.
FINAL QUALITY INSPECTION
Finished parts are tested for standard electrical parameters and visual/
mechanical characteristics. Each production lot is 100% evaluated
for: capacitance and proof voltage at 2.5 UR. In addition, production is
periodically evaluated for:
Life (Endurance)
125°C, 2UR, 1000 hours
•
•
•
•
•
Average capacitance with histogram printout for capacitance distribution;
IR and Breakdown Voltage distribution;
Temperature Coefficient;
Accelerated Damp
Heat Steady State
85°C, 85% RH, U
1000 hours.
R
,
Solderability;
Dimensional, mechanical and temperature stability.
QUALITY ASSURANCE
The reliability of these multilayer organic capacitors has been extensively
TABLE I: CASE SIZE ML03
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
Cap. Tol.
P, A, B
P, A, B
P, A, B
P, A, B
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
WVDC
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
Cap. pF
1.3
Cap. Tol.
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
WVDC
Cap. pF
3.0
Cap. Tol.
P, A, B, C
P, A, B, C
P, A, B, C
P, A, B, C
WVDC
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
50, 250
1.4
3.3
1.5
3.6
3.9
1.6
1.7
Note: Capacitance measured at 1MHz.
1.8
1.9
2.0
2.2
2.4
2.5
2.7
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
341
012218
Multilayer Organic (MLO®) Capacitors
MLO® Capacitors
Typical ESR vs. Frequency
MLO® 0603
10.00
1.00
0.10
0.01
0.4 pF
0.7 pF
0.9 pF
1.4 pF
1.7 pF
2.2 pF
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
2.00
GHz
Typical Q vs. Frequency
MLO® 0603
10000
1000
100
10
2.5 pF
2.0 pF
1.5 pF
1.0pF
0.5pF
Q
1
0.1
-1
1
10
Frequency (GHz)
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
342
012218
Multilayer Organic (MLO®) Capacitors
MLO® Capacitors
Typical Self Resonant Frequency vs. Capacitance
MLO® 0603
1000
10
1
0.1
1
10
pF
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
343
012218
相关型号:
ML03512R2BAT2A
Ceramic Capacitor, Multilayer, Ceramic, 50V, 4.55% +Tol, 4.55% -Tol, C0G, 30ppm/Cel TC, 0.0000022uF, Surface Mount, 0603, CHIP, ROHS COMPLIANT
KYOCERA AVX
ML03512R4BAT2A
Ceramic Capacitor, Multilayer, Ceramic, 50V, 4.17% +Tol, 4.17% -Tol, C0G, 30ppm/Cel TC, 0.0000024uF, Surface Mount, 0603, CHIP, ROHS COMPLIANT
KYOCERA AVX
ML03512R5BAT2A
Ceramic Capacitor, Multilayer, Ceramic, 50V, 4% +Tol, 4% -Tol, C0G, 30ppm/Cel TC, 0.0000025uF, Surface Mount, 0603, CHIP, ROHS COMPLIANT
KYOCERA AVX
©2020 ICPDF网 联系我们和版权申明